ASTi Telestra Service Manual Page 150

  • Download
  • Add to my manuals
  • Print
  • Page
    / 248
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 149
DOC-01-TELAS-CRG-4 ASTi ACE Studio Components Reference Guide Rev.M
140 Copyright © 2014 Advanced Simulation Technology inc.
10.2. CommPanel8HRTF4
Summary: Operates the same as the CommPanel8, but outputs audio with the
HRTF service for 3D positioned communications.
Description: The CommPanel8HRTF4, much like a standard CommPanel,
transmits and receives on multiple intercoms or radios. The component’s InSignal
and SideSignal behavior is identical to those of the generic comm panel. However,
instead of one OutSignal link, four output signals are generated and sent to the
HRTF service for 3D mixing. The four signals correspond to four positions in 3D
space.
This component should be paired with an Audio/HRTFOut4 component, which
receives the four output signals and does the 3D filtering. To establish this
connection, the components must have matching HRTF busses. The four
PosNOutControl masks determine which intercom buses contribute receive audio
to each 3D position.
Multiple CommPanel8HRTF4 components can share the same HRTF bus to
contribute audio to the same set of four positions.
Audio Inputs
InSignal
Type Default Value
audio n/a
Description: Input audio to be transmitted by the Comm Panel.
Control Inputs
InControl
Type Default Value
byte 255
Description: Bitmask that selects the intercom buses to transmit the
InSignal. For example, a value of 1 will transmit on Sig1, a value of
2 on Sig2, 4 on Sig3, and 255 on all buses.
Control Inputs
InGain
Type Default Value
float32 1.0
Description: Scales the input audio.
Pos1Out
Control-
Pos4Out
Control
Type Default Value
byte 255
Description: Bitmask that selects which buses will contribute their
output signal to the position N (1-4) output.
Power
Type Default Value
boolean True
Description: Controls the power of the comm panel. If False no
audio is received or transmitted.
PTT
Type Default Value
boolean False
Description: Controls comm panel audio transmission.
Side
Control
Type Default Value
byte 255
Description: Bitmask that selects the intercom buses that will con-
tribute to the SideSignal. For example, a value of 1 will receive from
Sig1, a value of 2 from Sig2, 4 from Sig3, and 255 from all buses.
Page view 149
1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 247 248

Comments to this Manuals

No comments