ASTi Telestra Service Manual Page 131
- Page / 248
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ASTi ACE Studio Components Reference Guide Rev. M DOC-01-TELAS-CRG-4
Copyright © 2014 Advanced Simulation Technology inc. 121
7.5. Prop Rotor
Summary: The Prop Rotor component provides the composite sound for a rotating
helicopter blade.
Description: The Prop Rotor component includes the three principal sources of
noise; air noise from the movement of air over the blades, force noise from the
impact of the blade with the air medium, and thickness of noise due to the dual edge
sound sources on a blade.
The overall sound can be tuned based upon blade parameters such as radius and
blade count, with overall gain control based on both RPM and blade angle.
Control Inputs
Angle
Type Default Value
float32 1.0
Description: Provides the blade angle value.
ForceGain
Type Default Value
float32 1.0
Description: The gain for the principle component of the blade
sound due to the air force on the blade. If a function connection is
not made then this gain equals the scale factor, or it is the scale fac-
tor times the result of the selected function RPM and Blade Angle.
Connect a table function for controlling the force gain based upon
RPM and Blade Angle.
Lagfilter
Type Default Value
float32 1.0
Description: This provides a limiting filter used for fade-in and
fade-out effects.
Control Inputs
NoiseGain
Type Default Value
float32 1.0
Description: The gain for the air noise component of the blade
sound. Connect to a table function for controlling the noise gains
based upon RPM and Blade Angle.
If the function connection is not made then the noise gain equals the
scale factor, or it is the scale factor times the result of the selected
function of RPM and Blade Angle.
Output-
Gain
Type Default Value
float32 1.0
Description: Amplitude gain of prop/rotor composite sound source.
If the gain connection is blank then the gain scale factor is used as
the gain value, or the gain is the scale factor times the output result
of the control component.
Radius
Type Default Value
float32 1.0
Description: This constant is used to scale tip mach speed based on
blade radius (in meters).
RPM
Type Default Value
float32 1.0
Description: The frequency (in Revolutions per Minute) of the
blade shaft.
Thickness-
Gain
Type Default Value
float32 1.0
Description: Connect a table function for controlling the thickness
gain based upon RPM and Blade Angle.
- Telestra 4 1
- ACE Studio Components 1
- Reference Guide 1
- Document: DOC-01-TELAS-CRG-4 1
- Table of Contents 5
- 1.0. Introduction 11
- 2.0. Audio Components 13
- 2.1. AmpMod 14
- Type Default Value 15
- 2.2. Audio Feed 16
- 2.3. AutoDred 17
- 2.4. Complex Playsound 22
- 2.5. Compressor 24
- XOutSig 28
- 2.6. Delay 29
- 2.7. Demux 30
- 2.8. Envelope 31
- 2.9. Filter 33
- 2.10. Lockout 36
- 2.11. Level D Capture 38
- 2.12. MessageList 40
- 2.13. Mixer 42
- 2.14. Noise Source 44
- 2.15. PEnvelope 47
- 2.16. PFilter 48
- 2.17. Playsound 49
- 2.18. Pulse 51
- 2.19. Pulse Sequence 53
- 2.20. PulseStep 56
- 2.21. PulseStream 59
- 2.22. Record Replay 64
- 2.23. SimpleMixer 68
- 2.24. Sequencer 69
- 2.25. Volume Control 71
- 2.26. Vox 72
- 2.27. Wave 75
- 3.0. AudioIO 78
- 4.0. Comm Panel 79
- 4.2. CommPanel8Stereo 83
- 4.3. Stereo Comm Panel 86
- 5.0. Control Components 88
- 5.2. ByteToBit 89
- 5.3. ByteMerger 90
- 5.4. Byte Splitter 92
- 5.5. Counter 94
- 5.6. Delay 97
- 5.7. Ident 98
- 5.8. Incrementer 99
- 5.9. IntCompare 100
- 5.10. IntTable 102
- 5.11. Latch 103
- 5.12. LogicTable 104
- 5.13. MathFunction 106
- 5.12. NumToString 108
- 5.13. PassThrough 110
- 6.0. Dynamics 111
- 6.1. AGC 112
- 6.2. CompressorLimiter 114
- 6.3. Expander 116
- 6.4. Gate 118
- 7.0. Environmental Cue 120
- 7.2. Engine 123
- 7.3. Engine Level D 126
- 7.4. MultiFilter 128
- 7.5. Prop Rotor 131
- 7.6. Vibration Capture 133
- 8.0. Highway Service 134
- 8.1. AuralCue 135
- 8.2. AuralCuePosn 136
- 8.3. SpeakerOutput 137
- 9.0. Highway 3D Service 138
- 9.1. Audio > Audio Feed 141
- 9.5. AudioIO > HighwayOut 145
- 9.6. AudioIO > SpeakerOut 146
- 10.0. HRTF Service 147
- 10.1. HRTFOut4 148
- 10.2. CommPanel8HRTF4 150
- 11.0. IOInterfaces 152
- 11.2. ACE_RIU_SerialByteOut 154
- 11.3. ACUchannel 155
- 11.4. ACU2channel 158
- 11.5. ACU2_SerialByteOut 161
- 11.6. AmpOut 162
- 11.7. SerialPort 163
- 11.8. VoisusChannel 164
- 12.0. Intercoms 167
- 12.2. IcomTx 169
- 12.3. Intercom Bus Power 170
- 12.4. Intercom Bus Service 171
- 13.0. Platform 172
- 13.1. Detonation 173
- 13.2. Fire 173
- 13.3. Geocentric Position 174
- 13.4. Geodetic Position 175
- 13.5. Relative Position 176
- 14.0. Host Control 181
- 14.2. Host Out 185
- 14.3. Cell Service 186
- 14.3.2. CellOut 188
- 15.0. Radio Components 189
- 15.1. ColocatedBeacon 190
- 15.2. Generic Control 193
- 15.3. HFServer 196
- 15.4. Intercom Transceiver 198
- 15.5. ICU 201
- 15.6. MarkerTone 202
- 15.7. MorseKeyer 206
- 15.8. RCUbasic 208
- 15.9. Receiver 210
- 15.10. Relay 212
- 14.11. Satellite 215
- 14.12. Transceiver 219
- 14.13. Transmitter 230
- 14.14. VORTAC_Controller 232
- 15.0. Speech 234
- 15.2. TextToSpeech 235
- 16.0. Remote Control 236
Related products and manuals for Recording Equipment ASTi Telestra
Recording Equipment ASTi Telestra User's Guide
(166 pages)
(166 pages)
Recording Equipment ASTi Telestra User's Guide
(214 pages)
(214 pages)
Recording Equipment ASTi Telestra Service Manual
(119 pages)
(119 pages)
© 2020, manymanuals.com. All rights reserved. | 0.935 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals