ASTi Telestra Service Manual download pdf (Page 29)

ASTi Telestra 4 Target Operations & Maintenance Manual (Ver. 1, Rev. K)

5.5. RTI EXEC

The HLA software that runs on the Target is an HLA federate. This federate software, when

combined with the ACE Studio model processing, implements a full radio simulation

environment, based upon the data structures defined in the ASTi Radio SOM.

From power on, an HLA-enabled Target will start the federate application as a background

process. A particular federate may be accessed through the remote control interface.

The RTI Software: The DMSO RTI requires that the “rtiexec” application is running

somewhere on the HLA network. In the normal mode of use, the rtiexec will be running on

another computer system resident on the HLA network. However, to perform local-only testing or

stand-alone tests, it is possible to run the rtiexec on the Target. The rtiexec will service

every system on the network. Prior to starting the rtiexec, the DMSO RTI must be installed,

and the proper RTI library path must be specified in the RMS HLA configuration section. Once

the Target is configured to use the DMSO RTI, log in to the system as “hlauser”, go to the

DMSO RTI directory (in /opt/rti) and enter the following commands to start rtiexec:

cd config

. rtienv.sh

cd ../bin

./rtiexec

Although this is not necessary, the MÄK RTI may also use an rtiexec application. To run the

rtiexec application for the MÄK RTI, go the MÄK RTI directory (in /opt/rti) and type the

following commands:

cd bin

./rtiexec

To stop the RTI, type CTRL+C.

Please refer to the MÄK RTI Reference Manual for more information on the rtiexec

application. The MÄK RTI requires a license server to run.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 42 43

No comments

ASTi Telestra Service Manual Page 29