ASTi Telestra User's Guide download pdf (Page 14)

ASTi Telestra User Guide (Ver. 3, Rev. G.1)

Telestra Compatibility

The user should be aware of possible hardware compatibility issues when running Telestra MBV.

When using a mouse and keyboard with Telestra (primarily during development mode) the mouse

and keyboard must have a PS/2 type connector not a USB connector.

ASTi recommends Microsoft and Logitech wheel mice year 2003 or later. Although this is not

required, ASTi recommends, more speciﬁcally, the Logitech Mx310 mouse using the USB-to-PS/

2 adapter which comes with the mouse. ASTi does not recommend using off-brand and trackball

mice.

When using a mouse, the user may experience problems if it is running through a KVM (key-

board, video, and mouse) switch, and it is not directly attached to the Telestra system. ASTi rec-

ommends the 8-port Raritan MasterConsole II (part #MCC8), this KVM has been tested to work

with all combinations of mice and host systems (Windows XP and Telestra). Other recommenda-

tions include the 4-port and 16-port MasterConsole II KVM switches; however, ASTi has not

tested them.

A minimum 17” monitor is required, and a 19” monitor is recommended with a resolution of 1280

x 1024 or higher. The minimum requirements are a horizontal sync of 30-68 hz or greater and a

vertical refresh of 50-85 Khz or greater.

Note: Telestra MBV cannot operate properly when using any USB items outside of the recom-

mended ASTi peripherals.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 165 166

No comments

ASTi Telestra User's Guide Page 14